Products

Modified acrylic topcoat with a convenient 1:1 mixing ratio for easy, efficient use. Formulated for brush and roller application with a glossy finish and good gloss retention. Direct-to-metal properties eliminate the need for a primer in certain applications. Isocyanate-free — no di-isocyanates generated during hot work, welding, or fires. Ideal for maintenance and touch-up over epoxy primers.

One-component, fast-drying acrylic topcoat with a matt finish. High build, direct-to-metal capable, and can be applied at sub-zero surface temperatures. Single pack — no mixing required. Suitable for refineries, power plants, bridges, buildings, and a wide range of industrial structures. MCI tintable.

Easy-to-use single-pack alkyd topcoat with a glossy finish. No mixing required and no pot life restrictions, reducing preparation time, waste, and application costs. Easily applied by brush, roller, or spray on both aged and new coatings. Available in a full assortment of colours. MCI tintable.

One-component alkyd primer with zinc phosphate. No mixing required — reducing waste, spills, and leftover paint. Dries quickly, forming a hard dry film in only 90 minutes, enabling rapid handling, stacking, and shipping of coated items.

One-component, fast-drying alkyd topcoat with a high gloss finish and good gloss retention. Suitable for light industry and coastal environments for both newbuild and maintenance projects. Recommended on buildings and general structural steel. MCI tintable.

Premium silyl methacrylate self-polishing antifouling delivering ultra-low frictional resistance and up to 11.7% fuel savings. Verifiable 2.0% speed loss for low-to-medium activity vessels including bulk carriers, tankers, and slow steaming vessels. 55 idle day protection with microZone technology. IMO AFS Convention compliant.

One-component acrylic hydrolysing antifouling based on ion exchange technology. Self-polishing characteristics provide good fouling protection and reduce hull deterioration. Suitable for newbuilding and drydocking on vessels trading at a wide range of speed and high activity. Service periods up to 36 months. Can be applied at sub-zero surface temperatures.

High-solids, high-build, fast-curing two-component epoxy primer pigmented with zinc phosphate. Designed for reliable anti-corrosion performance in atmospheric environments. Optimised for new construction with fast dry-to-recoat and dry-to-handle times. Low temperature application possible. Part of the Penguard range — over 650 million litres sold globally since the 1980s.

Fast-drying, high-build epoxy coating reinforced with micaceous iron oxide (MIO) for increased barrier effect. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric conditions. Suitable up to C5 corrosivity. Fast dry-to-recoat and dry-to-handle. Can be applied at sub-zero surface temperatures.

Surface-tolerant, abrasion-resistant epoxy mastic primer for maintenance and repair where optimum surface preparation is not possible. Provides long-lasting protection in high corrosivity environments. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. MCI tintable in a wide range of colours. Sub-zero application capable. NORSOK M-501, LEED, and BREEAM certified.

Surface-tolerant epoxy mastic in a convenient 1:1 smart pack format designed for brush and roller application. Same Jotamastic performance with easy mixing and reduced waste. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. Ideal for smaller maintenance and repair jobs. IMO Low Flame Spread certified for marine use.

Fast-drying, abrasion-resistant universal epoxy coating. High build and high volume solids providing excellent corrosion protection. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. Also suitable as a maintenance coating on aged surfaces. Sub-zero application capable. IMO PSPC approved for water ballast tanks and crude oil tanks. NORSOK M-501 pre-qualified.

Two-component, high-build, all-purpose polyamide epoxy coating for new construction. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. For corrosive environments up to very high. Suitable for offshore, refineries, power plants, bridges, buildings, and mining equipment. Heat resistant up to 120°C continuous.

Two-component polyamide-cured epoxy primer pigmented with zinc phosphate, specially designed for galvanised steel. High build with good corrosion protection in atmospheric environments. Suitable on carbon steel, stainless steel, aluminium, galvanised steel, and thermally sprayed zinc. For offshore, refineries, power plants, bridges, buildings, and mining equipment. Heat resistant up to 120°C continuous.

Aluminium-pigmented surface-tolerant epoxy mastic for maintenance and repair. High solids, high build with improved barrier effect from aluminium pigments. For areas where optimum surface preparation is not possible. Provides long-lasting protection in high corrosivity environments. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. Sub-zero application capable. IMO PSPC approved for crude oil tanks. NORSOK M-501 pre-qualified.

Room-temperature curing version of Jotamastic 90 ALU. Same aluminium-pigmented, surface-tolerant epoxy mastic performance optimised for cooler ambient conditions. For maintenance and repair where optimum surface preparation is not possible. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. Sub-zero application capable.

High-volume solids inorganic zinc ethyl silicate primer with 85% zinc dust for severe corrosive environments. Provides very good corrosion protection in atmospheric conditions and is heat resistant up to 540°C. Fast dry-to-recoat and dry-to-handle. NORSOK M-501 pre-qualified. Complies with ASTM D520 type II zinc dust.

Two-component polyamine-cured phenolic/novolac epoxy tank lining with excellent chemical resistance. Specially designed for internal lining of offshore, onshore, and buried tanks and pipes — including chemical storage, waste water, grey water, process water, concrete bund, fire service lines, and drilling mud tanks. Very good resistance to high temperature products. Can be used in pressure vessels. IMO PSPC approved for crude oil tanks.

Two-component solvent-free epoxy tank lining with good chemical resistance. Suitable for potable water, grey water, and crude oil tanks. Approved to AS/NZS 4020 for contact with drinking water. Can be used as primer, midcoat, or finish coat in atmospheric and immersed environments. For onshore, offshore, buried tanks, and pipes. Contributes to LEED and BREEAM credits.

Premium polysiloxane topcoat with outstanding durability and excellent colour and gloss retention. Isocyanate-free — does not generate di-isocyanates at elevated temperatures. High volume solids with lower VOC than traditional polyurethanes. Excellent abrasion and chemical resistance. NORSOK M-501 pre-qualified. Contributes to LEED and BREEAM green building credits. Made to order.

All-round polyurethane topcoat with good durability and excellent application properties for both marine and protective structures. Optimised rheology and flow for airless spray, also suitable for brush and roller. Durable finish with good colour and gloss retention. MCI tintable.

Polyurethane topcoat with a robust finish, very good colour and gloss retention, and low VOC. Strong mechanical properties with very good chemical resistance and low dirt pick-up. High sag resistance, minimal spray dust, and cures at low temperatures. Excellent application by airless spray, brush, and roller. For topsides, decks, superstructures, offshore, refineries, power plants, bridges, and buildings. MCI tintable. APAS approved. IMO Low Flame Spread certified.

Highly flexible and impact-resistant polyurethane topcoat with direct-to-metal properties. Withstands torsional stress and mechanical impact. Can be used as a one-coat direct-to-metal system in C2/C3 corrosivity classes with anticorrosive pigments. High volume solids with good sag resistance and flow for high film build. MCI tintable. FDA compliant for dry food contact. IMO Low Flame Spread certified.

One-component acrylic topcoat with a semi-gloss finish. Physically drying — fast drying with good colour and gloss retention. Single pack simplifies application with limited waste. MCI tintable. For use as topcoat in atmospheric environments.

One-component, fast-drying vinyl coating for use as primer or midcoat in atmospheric and immersed environments. Primarily used as tie coat for antifouling systems on topsides, decks, and superstructures. Single pack — no mixing required. IMO Low Flame Spread certified.

Two-component vinyl epoxy tie coat designed between epoxy primers and antifouling systems. Also serves as holding primer for a wide range of topcoats. For atmospheric and immersed environments up to very high corrosivity. Suitable for offshore splash zones, water inlets, cooling pipes, jetties, and bridges. Sub-zero application capable.

High-solids epoxy primer with 80% zinc dust for severe corrosive environments. Excellent corrosion protection as part of a complete coating system where extended durability is required. For atmospheric environments up to C5 VH (ISO 12944-2). Suitable for repair of inorganic zinc silicate coatings and damaged galvanised steel. NORSOK M-501 pre-qualified. Complies with ASTM D520 type II zinc dust.