Penguard Express MIO
Fast-drying, high-build epoxy coating reinforced with micaceous iron oxide (MIO) for increased barrier effect. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric conditions. Suitable up to C5 corrosivity. Fast dry-to-recoat and dry-to-handle. Can be applied at sub-zero surface temperatures.
Key Features
Technical Specifications
Product Properties
- Volume Solids
- 74 ± 2%
- VOC (EU Directive)
- 283 g/l
- Density
- 1.6 kg/l
- Flash Point
- 32°C
Film Build
- Dry Film Thickness (DFT)
- 75–250 μm
- Gloss Level
- Matt (0–35 GU @ 60°)
Application
- Mixing Ratio
- 4:1 (Comp A : Comp B)
- Thinner
- Jotun Thinner No. 17
- Airless Spray
- Nozzle 13–23 thou, 150 bar / 2100 psi
- Pot Life
- 2h @ 23°C
Drying Times (23°C)
- Drying Schedule
- Surface dry 1h, Walk-on dry 3h, Overcoat min 2h, Cured 4 days @ 23°C
Performance
- Heat Resistance
- 120°C continuous / 140°C peak
Packaging
- Colours Available
- Grey, red
- Pack Sizes
- 4L + 1L (5L kit); 16L + 4L (20L kit)
- Shelf Life
- 24 months (both components)
Suitable Substrates
Environments
Related Products
Epoxy Primer
Penguard Express ZP
High-solids, high-build, fast-curing two-component epoxy primer pigmented with zinc phosphate. Designed for reliable anti-corrosion performance in atmospheric environments. Optimised for new construction with fast dry-to-recoat and dry-to-handle times. Low temperature application possible. Part of the Penguard range — over 650 million litres sold globally since the 1980s.
Epoxy Primer
Jotamastic 90
Surface-tolerant, abrasion-resistant epoxy mastic primer for maintenance and repair where optimum surface preparation is not possible. Provides long-lasting protection in high corrosivity environments. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. MCI tintable in a wide range of colours. Sub-zero application capable. NORSOK M-501, LEED, and BREEAM certified.
Epoxy Primer
Jotamastic Smart Pack
Surface-tolerant epoxy mastic in a convenient 1:1 smart pack format designed for brush and roller application. Same Jotamastic performance with easy mixing and reduced waste. Can be used as primer, midcoat, finish coat, or single-coat system in atmospheric and immersed environments. Ideal for smaller maintenance and repair jobs. IMO Low Flame Spread certified for marine use.
Ready to Talk Coatings?
Our team is here to help with product selection, specifications, and technical support for your next project.